Bookmark Novus Dental! |
 |
|
Please note:
To prevent fogging during use, we highly recommend running the mirror under hot water for a few seconds, prior to inserting into the patient's mouth, to raise the overall temperature of the mirror (prevents condensation). A soft paper towel or cloth can be used to remove excess water droplets.
Care should be taken to ensure both proper cleaning and longevity. The recommended method for decontamination is thorough cleaning followed by steam sterilization using the following procedures.
Prior to Sterilizing:
Prior to autoclaving, we recommend rinsing the mirror with soap and water to remove any surface contaminants. After rinsing, dry with a paper towel or cloth and place the mirror in a sterilization bag.
If you chose to use an UltraSonic cleaner to remove contaminants, please avoid placing the mirror in with other sharp metal intruments to prevent any scratching of the mirrored surface.
Sterilizing:
|
Steam Autoclave: Time - 15-20 minutes Temperature - 250-270 degrees Pressure - 15 PSI |
Recommended Usage Instructions for the Full Arch Intraoral Dental Mirror
| Maxillary Image | Mandibular Image |
 |
 |
|
Rest the mirror against the lower, front teeth. Have the patient curl their upper lip away from their anterior teeth. |
Press the mirror against the upper, front teeth. Have the patient curl their lower lip away from their anterior teeth. |
| development by |
|
|